The Ultra Gauge EM Plus v1.4 is a very useful tool for any regular, or tuned vehicle. Where some vehicles come with just a few, or even no dashboard gauges, the Ultra Gauge allows you to access a huge range of live, accurate readouts.
With 78 possible readouts, readiness monitors and performance measurements, this inexpensive gauge is must have. Fitted in less than 5 minutes, this could save your car should you have a malfunction and otherwise give you an idea on things such as water temperature, for example.
Includes:
1x OBD2 Display - this comes with a swivel mount. The foot is made of rubber so it can adhere (with it's strong sticky pad) to curved surfaces as well as flat.
Instructions:
Can be downloaded by searching for 'UltraGauge Instructions' online or visit Youtube for readily available installation videos.
Before Application: Use alcohol to wipe clean the area where you wish to secure your Ultra OBD2 Gauge. Slightly heat up the surface before application for best results.
Features Summary:
Horizontal Mount: For dash top mounting. Anything with a flat or slightly slanted surface, the horizontal mount is right for you.
Code Reading: The Ultra Gauge can also be used to read and clear codes. Should your car develop a fault, you are able to read the fault immediately. You are also able to set alarms, for example should your water temperature exceed a certain threshold, the alarm will be raised.
Performance readouts: These allow you to measure your times such as 0-60, 0-100 and quarter miles times. It does measure via OBD and therefore wheel speed, so take these results with a pinch of salt.
Readiness Monitors: This feature will let you know when your car is ready to go. With readouts on things such as the Catalytic converter, O2 sensors and much more, you will be able to see when your vehicle is at its optimum temperatures.
Live Readouts: Below is a list of all 78 POTENTIAL readouts. Please note, some cars will vary on what can & can't be viewed live from the OBD2 port. For example, Vauxhall Corsa VXR's, as well as the Audi S3 8P platform (Seat Leon included)cannot read boost pressure.
Please note: This is a display, the information being displayed is provided by the vehicle manufacturers ECU / engine sensors. If a vehicle does not have sensors fitted for certain functions then no OBD display will display information values for these functions. This Ultra Gauge will only display information if the vehicle has the ECU information available for these functions. ECU function/information availability will obviously vary between vehicle manufacturers and different specifications of vehicle.
